Epoxy Flooring in Marlow, OK

Most epoxy flooring we put down in Marlow goes into houses whose owners are not going anywhere. The 2020 census found that 65.7% of occupied homes in Marlow are owner-occupied, and the median age in town is 40.2. About one resident in five is 65 or older. People in that position want a garage floor that will last, cleans up easily and does not get slick when a wet car pulls in.

Grip comes first

A smooth, glossy coating looks good in photos. It can also be slippery when it is wet. Rain dripping off a truck, a spilled bucket or tracked-in mud from the yard can turn a slick floor into a fall risk. For Marlow homeowners we usually steer toward finishes with built-in texture:

• Full flake broadcast: colored chips spread to full coverage, then sealed. The chips give the surface a slight texture.
• Anti-slip additive: a fine grit mixed into the topcoat on solid-color floors.
• Textured patio coating: a rougher finish for outdoor steps, porches and walkways.

We talk through how the space is used before picking a system. A garage where someone walks to the laundry with full hands needs a different finish than a sales floor.

Steps, thresholds and the walk from the car

Falls often happen at transitions. The step from the garage into the house, the lip at the garage door and the edge of a back porch are common trouble spots. We can carry the coating up the step, add a contrasting color at the edge so it is easier to see, and smooth out small lips with repair material before coating. A patched threshold is often more useful than any color choice.

The slab under the house

Marlow covers about 7.1 square miles along Wildhorse Creek, at the crossing of US 81 and State Highway 29. Its housing stock is a mix of older homes near downtown and newer houses on the edges of town. Older slabs tend to have shrinkage cracks, oil stains and worn spots. Newer ones are often troweled very smooth, and a coating will not hold on them until the surface is ground open. Either way, we grind the full floor and repair cracks before the base coat goes down.

What a Marlow garage job looks like

1. We measure, check cracks and test for old sealers. 2. You get a written quote with prep, system and total. 3. The floor is ground, vacuumed and repaired. 4. Base coat, flake or color layer and topcoat go down in order. 5. We leave written instructions on walk and drive times.

Patios and pool decks around town

Marlow has plenty of backyard patios that get used every warm evening. Bare concrete outside gets hot, stains from grills and leaves, and grows cracks from heat and soil movement. A patio coating fixes the look and adds texture. We usually go with a lighter color so the surface stays cooler in summer, and a UV-stable topcoat so it holds its color. Cracks get filled first. If a section has sunk enough to hold water, we talk about leveling it before coating. Around a pool, we keep the finish textured and avoid anything glossy, since wet feet and smooth coatings do not mix.

Ready to talk about your floor? Call (580) 896-4922 or

Get a Free Estimate

.