Epoxy Flooring in Snyder, OK

Snyder runs on farming and ranching, and that shapes the epoxy flooring work we do there. Cotton, corn, wheat and hay are the main crops around town. Farms like that have equipment sheds and shop buildings with concrete floors, and those floors see more abuse than any house garage. Snyder sits at the junction of US 62 and US 183, about 36 miles west of Lawton, so we plan each trip around the full scope of the job.

Farm shops and equipment sheds

A shop that services tractors, sprayers and combines sees hydraulic fluid, grease, diesel and dragged implements. Bare concrete absorbs all of it. Over time the floor darkens, gets slick and starts to dust and pit. A coated shop floor is easier to sweep, easier to see a dropped bolt on, and safer to walk when something spills.

For these buildings we usually suggest:

• Grinding the full slab and degreasing oil-soaked areas
• Repairing spalls and cracks from heavy loads
• A thick 100% solids epoxy base with broadcast texture
• A chemical-resistant topcoat around service areas

We can also coat just the service area of a larger building if storage space does not need it.

Snyder's brick storefronts

Snyder's history is visible on Main Street. Fires in 1906 and 1909 destroyed most of the wooden buildings there, and they were replaced with brick. Some of those older commercial buildings have concrete floors under old tile or carpet. Once the covering is pulled up, the slab often has adhesive, patches and cracks. We grind off the old glue, fill the damage and coat the floor for a shop, office or storage space. If what is under the tile is not concrete, we will tell you, since we only coat concrete.

Home garages

The 2020 census counted 651 housing units in Snyder, and 64.1% of occupied homes are owner-occupied. Many lots have a single-car or detached garage rather than a large attached one. Those floors are small, but they still need the same prep. A flake broadcast finish hides dirt from gravel roads and adds grip.

Storm shelters

Snyder knows tornado risk better than most towns. A 1905 tornado killed 97 people here. If you have a shelter set into your garage floor, we coat around the hatch and keep the opening, hinges and seal clear so the door still works as it should.

Timing around the farm year

Farm shops are busiest at planting and harvest. The best time to coat a shop floor is when equipment can be moved outside for a few days. We work with your schedule and write down how long the floor needs before vehicles roll back in. A faster-curing topcoat can shorten that window if the building cannot be empty for long. We also tell you which areas can be coated first so the rest of the shop stays in use.

Garage finishes that suit small-town use

A Snyder garage often doubles as a workshop, storage room or place to clean up after outdoor work. A full flake floor hides dirt between cleanings and gives grip when boots are wet. A solid color with a light chip is cleaner looking for a garage used mostly for parking. Either way, the slab is ground and repaired first. We tell you how long the floor needs before you walk on it and before you park on it.

Call (580) 896-4922 or

Get a Free Estimate

to set up a visit.